Here we are with the next twelve veneers. What I
am going to do on this page is include any of the alphabetically listed veneers
that were missed on the first two pages, the reason being that since I started
this section of the web site I have managed to acquire samples of some rare and
unusual veneers that will make an interesting addition to this site. I appreciate that
some of the veneers I am going to show you are now more or less unobtainable,
but, however, you may manage to chance upon some small examples of them in your
travels and may wish to identify them. So here we go with the next dozen
veneers.We will start with number 25 although
alphabetically some of the veneers will inevitably be out of order with the
previous two pages.
25/. ABURA: A smooth orange brown coloured
veneer sometimes found with a blue mineral staining that could be used for sky
effects. Care must be taken with this veneer when you apply your varnish because
it will go considerably darker than you see it in it's untreated state. It's a
nice soft easy cutting veneer that could also be used for roof tops, sails and
water effects reflecting a red evening sunset. It could possibly be used for
shadow in portrait work. This is a West African veneer and it's Latin name is Mitragyna Ciliata. Can also be found as
Bahis, Eben & Subaha.
26/. ACACIA BURR: This European veneer is
a nice reddish gold coloured smooth textured burr veneer. It is one of those
veneers that you don't come across very often, however if you can lay your hands
on a piece of this veneer I would recommend you add it to your collection. The
example shown in our veneer gallery is the only piece of this veneer I have
chanced upon in years! I'm afraid that all I can find of it's Latin name is
"Acacia Spp".
27/. AFZELIA: A West African veneer. This
golden brown veneer has a regular grain pattern with a subtle wide stripe
effect. The graining is of a small flecked nature, a little similar in style to
Avodire. Again, this is another of those veneers not very often seen
commercially. It is another veneer that I'm afraid I can't find the correct
Latin name for, so I'll give you the names I have on file: "Afzelia Spp" & Apa &
Doussie.
28/. ALMOND: (also known as Almond India)
This veneer obviously originates in India. Another golden brown veneer, very
similar in effect to the previous veneer Afzelia, although this veneer is a few
degrees lighter in colour. It is another of those difficult to find veneers that
I am including mainly for your reference. Happily with this veneer I do have the
correct Latin name for you, and it is Amygdalus Communis. Other names:
Terminalia Catappa.
29/. ALDER: European. A pleasant orange
brown veneer with subtle parallel line effect. Comfortable to work with and cuts
reasonably well. I seem to remember hearing a tale many years ago that burning
Alder wood indoors was to invite calamity into your home, so I wonder how we
would get on with sand scorching this veneer, perhaps we should do that
particular task in the garden, you folks living in flats and apartments will
just have to take your chances I'm afraid! Well you'll be pleased to know that
I've got a Latin name for this veneer, it is Alnus Glutinosa.
30/. AMARILLO:
This veneer comes from
South America. Very wide stripes of light tan to deep chocolate brown. And yet
another of those veneers you don't come across very often. As I only have a
small sample of this veneer I'm afraid that I haven't tried cutting this one so
I can't advise you on the ease of cutting this particular veneer, it looks like
it may be one of those veneers that need a lot of dipping the scalpel blade in
wax in order to get a good clean cut. This is another of those veneers I'm
including for your reference because it is one of those you may find difficult
to obtain. Latin name Centrolobium Spp.
31/. ANIGRE: Another African veneer. A
slightly fleck grained orange veneer with a subtle effect that seems to show a
second slight grain pattern almost invisibly crossing the main grain pattern at
a 90% angle, it is a nice effect. Another of those veneers shown here for
reference purposes. Latin name Aningeria Spp, also Muna, Kala, Agnegra, Landosan.
32/. APPLE: A British veneer. A smooth
grained deep orange slightly brown veneer. A wood often used for carving due to
the grain configuration of this wood. Not often seen in marquetry. Latin name
Malus Pumila, Communis.
33/. ASH JAPANESE: Obviously a Japanese
veneer. A creamy pink veneer with a wonderful wavy grain pattern producing a
mottled, rather wild figure. It's a medium textured hard veneer that cuts
easily. Another of those veneers that is not always available. Excellent for
floral subjects, costumes and drapery. Sand shading works well with this veneer
and it can be used for interesting sky effects. It makes a good grey coloured
wood when chemically treated lending itself well for water effects. Latin name
Tamo.
34/. ASH MOTTLED: European. Golden stripy
fiddle back effect veneer. Easy to work with and cuts nicely. This is another
veneer that could be used effectively to produce convincing water effects. Latin
name Fraxinus Excelsior.
35/. ASH OLIVE: European. Straw coloured
often found with slightly grey wavy figuring, can make useful sky effects in
certain pictures. It could also be used to create water effects in reasonably
still water scenes, for instance, in harbours etc. Latin name Fraxinus
Excelsior.
36/. BALSA: South America. Yellow orange
with a pronounced fleck in its grain pattern. Very often used for model making,
especially model aircraft intended for flying with miniature petrol engines
because of it's light structural weight and inherent strength. Not often used
for marquetry work, although it is a very easy wood to cut and use. Latin name
Ochroma Pyramidale.
Click on any of the numbers below for a quick
link to its respective veneer description page:
1
2
3
4
5
6
7
8
9
10
11
12 13
14
15
16
17
Well, that's another twelve veneers for you to
peruse in our gallery. This selection has included a fair amount of, shall we
say, rare veneers. As you will be aware, many veneers are now virtually
unobtainable these days due to the de-forestation taking place in many tropical
countries and the restrictions placed on the exportation of rare woods by the
relevant governments. You can understand the reluctance of these countries to
export these rare woods because the remaining stocks of those woods could so
easily be used up and the species would become extinct and we will have lost yet
another beautiful wood, so although we marquetarians very rarely get our hands
on these exotic timbers, the parent stock of these trees are being preserved for
future generations of marquetarians to appreciate. Apologies there for getting
on my political soap box, I hope you don't mind too much.
Best Wishes, Roy.
|